Product Information

• Infineon Port Devices Driver Download Windows 7
• Infineon Port Devices Driver Downloads

Below, we are sharing the links to USB drivers for most of the popular Android device manufacturers like Samsung, LG, Sony, Google, HTC, Motorola, Dell, etc. These USB drivers are safe to use as they are from their respective manufacturers. All the links are valid and official. We recommend you to download the latest USB drivers.

• Software & Hardware Products

• Infineon discussion forum. Infineon offers a wide range of Intelligent Power Modules (IPMs), depending on the level of integration and power required there are different options of semiconductors and drivers in numerous packages for various voltage and current classes.
• DP7 is the port direction SFR for P7. When DP7.x=0, P7.x is an input. When DP7.x=1, P7.x is an output. ODP7 is the open drain control SFR for P7. When ODP7.x=0, the P7.x output driver works in push/pull mode. When ODP7.x=1, the P7.x output driver works in open drain mode. Pins represents the states of the pins on the simulated MCU.
• A library of over 250,000 device drivers, firmware, BIOS and utilities for Windows.

Device Database®

• Device List
• Searching the Device Database

Downloads

Compliance Testing

Distributors

For Infineon XC2234N-24F — Port 7 (8-bit I/O with Open Drain)

Simulation support for this peripheral or feature is comprised of:

• Dialog boxes which display and allow you to change peripheral configuration.
• VTREGs (Virtual Target Registers) which support I/O with the peripheral.

These simulation capabilities are described below.

Parallel Port 7 Dialog

This dialog displays the SFR and pins of Port 7. This port has several alternate functions but it may be used as an 8-bit general purpose I/O port.

• P7 represents the P7 SFR. The HEX value and value of each bit is displayed and may be changed from this dialog.
• DP7 is the port direction SFR for P7. When DP7.x=0, P7.x is an input. When DP7.x=1, P7.x is an output.
• ODP7 is the open drain control SFR for P7. When ODP7.x=0, the P7.x output driver works in push/pull mode. When ODP7.x=1, the P7.x output driver works in open drain mode.
• Pins represents the states of the pins on the simulated MCU. When used as outputs, these have the same value as the P7 SFR. When used as inputs (DP7.x is 0) you may set the level of the input pin to high (1) or low (0).

PORTx VTREG
Data Type: unsigned int

The PORTx VTREGs represent the I/O pins of the simulated MCU for Port 0, Port 1, and so on. You may read PORTx to determine the state of the output pins of that port. For example, in the command window, you may type,

Infineon Port Devices Driver Download Windows 7

to obtain the value corresponding to the set pins of Port 8. You may also change the input values of port pins by changing the value of the VTREG. For example,

sets bits 4-7 and clears bits 0-3 and 8-15. You may use the bitwise operators AND(&), OR(|) and XOR(^) to change individual bits of the PORTx VTREGs. For example:

Infineon Port Devices Driver Downloads